Print
Petes' Blog
Show current content as RSS feed

Petes' Blog


Published on by

Early Double Triodes (part two)

Read entire post: Early Double Triodes (part two)

Early production sample of the LV12 with cock pit housing and connection.

 

Are these the earliest examples of a miniature double triode?  Are these the forerunners of the the 12AX7?

Read entire post
Published on by

Early Double Triodes (part one)

Read entire post: Early Double Triodes (part one)

Early developments of the LV12

Circa 1943 button construction double triode prototype.  Countained within a side contact envelope with 8 pin round base connected inline to a comb support

 

Is this one of the forerunners of the 12AX7?

Read entire post
Published on by

Mullard 1768

Read entire post: Mullard 1768

We have very little information on this valve, but believe it to be a double anode gas filled rectifier

Mullard-1768.jpg

Read entire post
Published on by

A bit of fun... What is it?

What_is_it_1_of_3.jpgWhat_is_it_2_of_3.jpg
What_is_it_3_of_3.jpg

 

We came across this valve in an unmarked box.  There are no markings on the valve, we are not sure what it is!  If anyone has any ideas, post below.  If anyone is able to help us identify it then we'll give you a credit to spend at our online shop as a thank-you!

Read entire post
Published on by

Museum pieces: EBL1

Philips EBL1

EBL1.jpg

Pair of mint condition Philips EBL1 from 1941.  Both valves bear the code K611-AIF.  Double diode audio output pentode, with CT8 side contact base.

Read entire post
Published on by

Museum pieces: Brimar Trustworthy ECC803S

Brimar 'Trustworthy' ECC803S

 

ECC803S-2.jpgECC803S-1.jpg

Extremely rare, Brimar 'Trustworthy' ECC803S -with carbon laminated box anode.  The trustworthy ECC803S were assembled in 1969 at Rochester Aiport in Kent for long life telephone applications.  The code on this particular tube is 3G6/977.

Read entire post
Published on by

Museum pieces: Osram L30

L30 Made by Osram for the General Electric Company Ltd. of England

L30_1_of_5.jpgL30_2_of_5.jpg

Originally made in 1938, this mint tube is the actual sample supplied to the BBC research department on 30th June 1939.

 

L30_4_of_5.jpg

 

The L30 was approved 19th July 1939 and given the serial number 482202.  Here are the test results;

 

L30_5_of_5.jpg

We still have the orignal blue and gold box, which is in good condition despite its' age.

Read entire post
Published on by

Museum pieces: EL60

The EL60 is the true forerunner of the iconic EL34.

 

This tube was approved and placed in the Philips museum at Mullard in Blackburn and still has the entry code of Sept '50, the code on the base reads 57 M91.

Slayer_horizontal.jpg

 

Believed to have been made by Philips in Eindhoven. The valve itself has rounded anode plates, square micas with ceramic insulators. The structure is connected directly to the base and has radiators at the top and bottom of the tube (four in total).  The major difference between the EL60 and the EL34 is the B9G base

Slayer_horizontal-2.jpg

We'll get some more photos posted shortly.

Read entire post